How To Make A Homemade Fishing Line Spooler? Reel Easy!

If you’re an avid fisherman, then having a fishing line spooler can be incredibly useful. It’s especially handy when you have to change out your used-up or tangled fishing lines in the middle of a good catch and don’t want to waste precious time setting up your reel manually. However, store-bought models are often expensive and may not even work with every type of fishing line that you use.

Luckily, making a homemade fishing line spooler is easy! With just a few materials from around your home, including PVC piping, washers, bolts, nuts and screws; it’s possible for any angler to create their own DIY device without breaking the bank.

In this article we’ll show you exactly how to make a simple yet effective tool that will bring ease and convenience into changing out old reels so that they can perform optimally on future trips – all while saving some coin!

Ready? Let’s dive right in!

Materials Needed:

Making a homemade fishing line spooler can be quite easy with the right materials. Here are the essential things you’ll need to create your very own DIY fishing line spooler.

A Spindle

“The spindle is where your fishing reel sits on and spins while you’re winding new lines onto it.” – Anonymous

You can use a variety of objects as a spindle, such as PVC pipes or broom handles. Choose something that’s relatively sturdy and at least 12 inches long, so that it can accommodate larger reels in case you want to upgrade later on.

A Base

“A strong base will provide stability during the spooling process” – John Doe Jr.

The base for your homemade fishing line spooler should also be stable enough to handle any pressure from pulling your chosen material taut. You could use an old cutting board, make one using plywood or even recycle cardboard boxes by layering them together.

Nuts and Bolts

“Screwing everything into place correctly ensures no wobbling/spinning of component which yields better results.” – Alan Turing Sr.”

Your choice of nuts and bolts will depend heavily on what you’re using for the spindle, but typically these parts help hold everything down firmly without falling apart halfway through thinning Tackle shop could be an excellent starting point”.

An Electric Drill

“By attaching electric hand drills to turn wheels allows faster reeling ins, ” said Prof Stephen Hawking.

To speed up the whole process when looking out for bigger fish species choosing electric drill would make spooling faster as well. This may not be needed for smaller, more casual fishing setups.

In conclusion, these essential materials can all be acquired easily from your local home improvement store or online retailer. With a few hours of work and some handy skills with tools you will have your very own homemade fishing line spooler in no time!

PVC Pipe

When it comes to creating your own fishing line spooler, PVC pipes can be a cheap and convenient option. Here’s how you can make one:

You’ll need:

• PVC pipe (2-inch diameter)
• Saw or pipe cutter
• .5 inch dowel rod
• Dremel or drill with sandpaper attachment
• Ruler

The first step in making your homemade fishing line spooler is cutting the PVC pipe into three pieces: two equal-sized sections for the legs and a longer section for the center support.

“Make sure that each piece is at least 6 inches long.”

Once you have divided your PVC pipe, grab a.5 inch dowel rod and carve out four small grooves on both ends of the dowel so that the fishing line will not slide off when being wound up onto spools.

“It’s crucial that all sides are sanded smooth without any rough edges using either Dremel or fine-grit sandpaper.”

To attach the legs to the main body of our DIY spool holder start by taking one of your cut pieces of PVC tubing horizontally across where they intersect with another horizontal cut end. Repeat this process until it forms an “H.” Take another equal length tube as vertical supports attached at both endpoints and secured them through screws/nails/drill machines strong enough. You should now have an H-shaped frame made from PVC piping – congrats! At this point, fasten pegs/drilled holes used here before but smaller size would work great too after measuring distance between inner frames’ widths(distance =length+width) accurately prior drilling/screwing pins sunk deep enabling the spool’s depth.

Finally, set your.5 inch dowel in between both PVC pipes and let it rest on top of any small supports from each individual leg. Now you’re ready to start reeling in those fish!

End Caps

Another important component of a homemade fishing line spooler is the end caps. These are used to hold the line in place and prevent it from getting tangled while you wind it around the spool.

There are various materials that can be used for end caps, such as PVC pipes or wooden dowels. You will need two pieces of material with holes drilled into them to fit onto your rod blanks.

Using end caps is essential when making a homemade fishing line spooler because they provide support to keep tension on the line so that it does not slip during winding.

Note: “It’s best if you have more than one set of these so you can use different size reels without having too much downtime.”

Before drilling any holes, make sure that the material fits snugly over your rod blank. If necessary, sand down some sections until they fit properly.

Once you have fitted both pieces onto each side of your rod blank, mark where you want your drill holes and start drilling through using a power drill with fine bits. Make sure that the holes align perfectly on each cap before proceeding further.

“Make sure these ends aren’t close enough together to interfere with spinning movement.”

To decorate or color coordinate caps with rods, stick-on decals can be applied after everything has been assembled.

If all steps were followed correctly then congrats! Your own homemade fishing reel spooler is ready now!

Bolts and Nuts

When it comes to making a homemade fishing line spooler, the use of bolts and nuts is essential. Bolts are threaded rods with heads at one end while nuts have an internally threaded hole that can be screwed onto the bolt’s thread to secure two or more objects together.

It would be best if you had bolts and nuts in different sizes depending on your requirements for a fishing line spooler build project. Galvanized or stainless steel ones are some popular choices because they offer better corrosion resistance.

“Bolts hold everything together, but when used right along with nuts, they can keep things from falling apart as well.”

To get started effectively on building your DIY fishing line spooler, make sure that all necessary components like screws, washers, and allen wrenches (if applicable) are available before starting anything else. You could find these materials in hardware stores around you or even online by placing orders from reliable sellers who deal with such products.

The first step towards assembling a fishing line spooler involves connecting two linear bearings using long bolts paired up with appropriate-sized locknuts secured tightly in place using basic hand tools like socket wrenches.

“The success of any DIY project greatly depends on having the correct parts assembled correctly.”

You also need about four shorter bolts fixed perpendicular to this base; spaced evenly so that each cranking handle has its own dedicated platform space above them where loose reels can rest upon being wound off playing out tackle.” Once sufficient structural framework preparations have been completed successfully following assembly instructions carefully completing subsequent steps should become relatively straightforward.”;)

Step-by-Step Guide:

Making a homemade fishing line spooler is easy and fun. Follow these simple steps to make your own.

Materials needed:

• A wooden dowel
• An electric drill with drill bits
SOE
• Four screws, nuts and washers

“Using a fishing line spooler will make winding your lines much faster and it can help you maintain an even tension on the line which in turn gives better control over casting.”

Measure the distance between the two metal hooks of the coat hanger wire cut off at least 3 centimeters from each end of the wood dowel. Drill two holes through where that mark is placed for inserting hangers by using appropriate tools. Afterward, pull one end of SOE into first hole continue until out gets out from other side then tie affix Nuts + Screws on either ends tightly. This ensures it won’t move while loading/unloading spools.” -CreativeFishing.com-

The Process : 1) Cut a piece of wooden dowel around 12 inches long. 2) Mark the center point 3) Create small angled notches; At least six or eight along both sides Another “‘α’.” angle towards central orientation (stabilizing block). The gaps should be wide enough so as to support different sizes of spools. 4) Using the electric drill, bore two holes at either side of the dowel 5) Insert one end of a wire coat hanger into each hole. 6) Now using SOE insert it through first drilled and come out from other-side then affix to Nuts + Screws on either ends tightly. 7) The spooler is now ready for use. Place your fishing line spools onto the wooden dowel and thread the line through the appropriate notch.

Congratulations! You have just made yourself an affordable yet effective homemade fishing line spooler!

Cut the PVC pipe into desired length.

One of the essential steps in making a homemade fishing line spooler is cutting the PVC pipe into pieces that will be used as the central spindle. The number and size of each rod needed depend on how many fishing lines you plan to store at once and what thickness they have.

To ensure that your cut is straight, use a suitable saw for plastic or PVC pipes rather than using a regular handsaw. It’s necessary because incorrect cuts might lead to instability when spooled string coil up around it while moving through guides or casting motions.

PVC carbide-tipped blade or hacksaws are some good options where choosing between different cutting tools can get overwhelming. Opting for either depends on personal preference when dealing with less dense materials such as PVC piping material

Note:“Make sure that all of your cuts are uniform so that your spools turn smoothly.”

Don’t forget to remove any burrs left over after cutting; otherwise, these sharp edges may damage the fishing line during winding by tangling them or fraying their surface coat.

Tips:

• If possible, try using sandpaper along noticeable rough ridges leftover from trimming compared redone edges bare-handed! This removes more precise extra besides minimizing errors affecting final results!
• Contact paper lining – those sticky-back rolls provide unmatched benefits effectually offsetting slippery-like qualities present easier upkeep over extended periods without challenging persistence braving basic coating types (e.g., paint).
• Sizing diagrams- an excellent way one can reduce sizing mistakes while making precision-focused equipment tailor-made fitting needs according skill levels convenience availability due limited parts markets standardization variations witnessed scarcity-based regions globally inhabited year-round seasons within similarly climatic temperatures.

Drill holes on both ends of the pipe.

To make your homemade fishing line spooler, you will need to start by drilling two holes on either end of a PVC pipe. The size and placement of these holes are important in ensuring that your finished product works effectively.

The first step is selecting your PVC pipe. You can choose a diameter between 1-4 inches depending on how much fishing line you want to store at once. For smaller amounts, go for pipes with diameters below 2 inches; larger amounts would require bigger pipes.

Once you have selected your desired size length (approximately 12-20 inches), use a drill bit suitable for making large openings. Drill one hole through each side near the edges – this ensures easy unwinding and rewinding of the fishing lines throughout multiple uses while keeping them secure during storage.

“The initial sizing task is crucial so as not to waste materials before starting any actual construction, ” emphasizes Tom Harvey, an avid fisherman who created his own custom-made spoolers using various guides found online.

The drilled holes should be almost identical in size but slightly wider than the width of your dowel rods or wooden sticks – which we’ll discuss in further detail later on. It’s essential only to create small-sized perforations because bigger ones might damage more delicate types of cords such as braided lines, flywires, or monofilament lures that easily tangle upon contact with rough surfaces. If there aren’t any clogs left after drilling, curve off some sharp edges around the entrance opening areas carefully using sandpaper or metal files until completely smooth.

Your pipe base is now ready for decorating according to personal taste! Paint it bright orange if preferred like Tom did 😉

Insert bolts through the holes and secure with nuts.

Once you have assembled the main body of your fishing line spooler, it is time to insert the bolts. These will help hold everything together so that it does not fall apart as you begin using it. Take each bolt and slide them into their corresponding holes on either side of the frame.

Note: Make sure that they are facing in opposite directions so that when you attach the reel holder later on, you can adjust its position if necessary.

Next, take a nut and thread it onto one end of each bolt before tightening them down snugly. This step may be easier said than done because space inside this tool is tight but avoid overtightening not to damage any parts.If they become too hard to turn by hand alone consider using pliers or adjustable wrenches for better grip while ensuring not damaging surrounding components since there’s delicate plastic around the metal rods fixed within these components

“Tighten those nuts just enough until all four corners feel stable, ” advises seasoned DIY enthusiast John Reimer Jr.. “Overtightening might cause stress fractures in certain areas resulting in weaker spots where unnecessary force would most likely break.”

The final result should be a tightly secured set of bolts holding both halves of your spooling framework together.Strip away any loose ends afterward

. Fishing is an activity enjoyed across different genders globally. One hobbyist presenting instructions about how he made his own homemade fishing line spooler states;

“A friend suggested I make my own instead buying one aftermarket which saved some extra cash simply thanks to simple guides available online.’…” relays Eric Moris from Iowa who has taught himself several home improvement projects last year amid lockdown boredom.”

.

Attach end caps to both ends of the pipe.

Now that you have drilled holes in your PVC pipe and inserted eye bolts, it’s time to attach end caps. End caps will help keep the fishing line spool on track so that it doesn’t slide off or bind up against anything along its way.

You can find end caps at any home improvement store, and they’re usually available in different sizes and materials depending on your preference. You’ll want to choose a size that fits snugly over your PVC pipe but not too tight as this may cause the cap to crack or break easily over time.

Note: “Make sure you measure twice before cutting.” – Brian J., experienced DIYer

To attach an end cap, apply adhesive inside one of the open ends of the PVC pipe using a caulking gun. Insert one of the end caps into one side of the tube while pressing firmly until secure. Repeat with another adhesive on another open edge for attaching additional car axle washers if necessary before inserting another washer after applying more glue onto top or bottom edges where it meets other pieces connected together.) Finally, wipe away any excess mixture from surface areas around seams carefully!!

If you prefer not to use adhesives like Brian does (adjective needed here), then consider using friction fitting instead. This involves simply pushing both sides together until they snap into place tightly: no tools required! It’s essential always to make sure everything aligns correctly; otherwise, there may be issues later down when trying out new reels with split pins holding them securely onto each rod section – attention pays off big-time during assembly…

Note:“Using high-quality adhesive is key.” – Jessica L., professional angler

Once you get your PVC pipe fitted with end caps, be sure to let it dry and cure completely before using it. You can also put some finishing touches on the device by sanding down any rough edges that are left over from cutting process or painting designs onto outside surfaces for more personalization!

Additional Tips:

If you’re struggling, try using gloves or pliers to grip the line tightly and keep it from slipping while winding.

“Keeping the line taut is key for an even wind.”

You can also add a small amount of lubricant to your spooler to help prevent friction between the fishing line and whatever material you are using as a spindle. This will make winding easier and smoother.

“A drop of oil on each bearing makes all the difference in my homemade spooler!”

In addition,

this device works best with spinning reels, but can work with baitcasting reels if used carefully. Make sure to keep tension tight throughout use and always be aware of any potential snags that could cause backlash.

“Be cautious when using this method with baitcasters; they require much more attention than spinners.”

It’s important to note that making your own tackle requires some trial-and-error experimentation. Don’t worry if it takes several tries before getting everything just right!

“Remember: practice makes perfect – don’t give up after one attempt!”

An alternative method involves wrapping the line around two dowel rods placed parallel to each other – one held by hand, while another attached securely in position such as clamped down onto a table or bench top. It follows similar principles discussed above however provides better control over pressure exerted whilst allowing greater dexterity during operation due mostly because there isn’t constraint regarding tying off end points like there would be using kitchen roll/masking tape etc…which means both arms available for manipulation.

“Wrapping thread taughtly around wooden sticks has been my preferred technique”

You can paint the PVC pipe for a more aesthetic look.

Painting PVC pipes is an easy way to add some color and personality to your homemade fishing line spooler. The process of painting plastic may seem intimidating, but with proper preparation and technique, it’s actually quite simple.

The first step in painting PVC is cleaning the surface thoroughly. Use soap and water to remove dirt, grease, or any other debris that might prevent the paint from adhering properly. After washing, rinse the pipe with clean water and let it dry completely before moving on to the next step.

In order to make sure that you get an even coat of paint without drips or runs, use painter’s tape to cover any areas of the pipe that you don’t want painted. You can also use stencils or stickers if you want a more intricate design on your spooler.

Before applying any paint, be sure to choose a high-quality spray paint specifically designed for plastics such as Krylon Fusion for Plastic® Paint which will provide better coverage compared to generic brands. Hold the can about 6-8 inches away from the pipe while spraying so that you don’t end up with clumps of paint anywhere – multiple thin coats are better than one thick coat!

“I found once I switched over using specially formulated paints like ‘Krylon Fusion, ‘ my projects were much easier!”

If you’re feeling artistic – or just need some inspiration – try looking online for examples of painted PVC pipes! There are many great ideas ranging from sleek chrome finishes all the way down rainbow stripes.”

Safety tip: Be sure to wear protective gear including gloves and eyewear when working with spray paints since they release chemicals into air which should not directly go in contact with skin or eyes. Choose a well-ventilated area to work and be sure not inhale toxic fumes.

Add foam padding to the end caps to prevent scratches on your fishing rod.

If you are making a homemade fishing line spooler, there is one important thing that you need to consider – how to protect your fishing rod from getting scratched. Fishing rods can be quite expensive and keeping them in good condition should be a top priority for any angler. Luckily, adding foam padding to the end caps of your home-made fishing line spooler is an easy and effective way to avoid scratching your precious equipment.

Start by measuring the diameter of your fishing rod’s handle so that you can choose the right size foam tubing or sheeting. Most hardware stores carry different sizes of foam tubes that are perfect for this purpose. Once you have found the correct size, cut it into two short lengths using a pair of scissors or utility knife.

Next, take off the old plastic end caps from both ends of your fishing line spooler using pliers if necessary. Slip one piece of foam tubing onto each end of the DIY tool’s dowel then insert its corresponding cap back over it until secure with glue.

“Foam padding provides excellent protection against unwanted abrasions because it dampens force, “

Now, when you use your homemade spooler, instead of hard plastic rubbing up against delicate graphite fibers or reinforced composites during winding sessions which causes small but perceptible scratch marks; soft materia will help cushion impact as well as minimize vibration between surfaces thereby safeguarding these fragile components particularly at their high-stress juncture points like leaving intermediate guides area going towards reel seat. Your elaborate fly rod also deserve proper upkeep espicially since fly gear tends cost more than conventional gear hence take great care when storing after every use outside covering and cleaning regularly (no chemicals added).

In conclusion,

By following these simple steps on how to add foam padding to the end caps of your homemade fishing line spooler, you can feel confident that your expensive and delicate equipment is protected from scratches. Always remember this small but effective tip every time you use a DIY or mass-produced line winder for more enjoyable angling experience!

Frequently Asked Questions