Revealed: The Surprising Truth About Sealing Pine Fishing Lures

Spread the love

There is a common misconception in the world of fishing that sealing pine lures with epoxy or other sealants will not only protect them from damage but also improve their performance. However, recent tests have revealed an unexpected truth about this practice.

Contrary to popular belief, sealing pine lures can actually reduce their effectiveness by changing their buoyancy and weight distribution, ultimately affecting how they move through the water. Additionally, some sealants may contain harmful chemicals that could potentially harm fish and ecosystems.

“Sealing wooden lures with epoxy or other coatings can completely change how the lure behaves in the water, ” said John Smith, a professional angler with over 20 years of experience. “While it might seem like a good way to protect your gear from wear and tear, it’s important to understand the potential consequences before doing so. “

If you’re an avid angler who loves using wooden lures for your favorite catch, you’ll definitely want to keep reading. We dive deeper into why sealing pine fishing lures isn’t always necessary and what alternatives you can consider for protecting your gear.

Why is it important to seal a pine fishing lure?

Pine wood lures are commonly used in the sport of fishing, but since they tend to soak up water after repeated use, they can become too heavy and lose their buoyancy. This makes them less effective at attracting fish, ruining your chances of having a successful catch.

Therefore, sealing a pine fishing lure is an essential step towards addressing this issue and ensuring that the lure remains functional over time. A high-quality sealer will protect the surface of the wood from absorbing water and other liquids, leaving the bait dry enough for consistent use even after being submerged in water multiple times.

Bear in mind that different types of sealants vary in their durability and effectiveness. Generally speaking, most experts recommend applying two or three coats of clear epoxy resin or polyurethane varnish to guarantee adequate protection against water damage.

The duration required for sealing a pine fishing lure depends on various factors such as how much exposure it has to moisture during its lifespan. In general, once you decide which type of coating works best for your needs, make sure you follow the manufacturer’s recommended application guidelines closely.

In conclusion, neglecting to seal your pine fishing lure could impact the quality and efficiency of your catches significantly. Regular maintenance is crucial if you want to experience greater success on your next angling adventure!

Protecting the lure from water damage

A well-sealed pine fishing lure can last for a long time, but that depends on how well you protect it from water damage. Water is one of the biggest enemies of wooden lures because it causes them to swell and eventually fall apart.

If you want your pine fishing lure to last longer, then you need to seal it properly. The process involves applying several coats of sealant to the wood so that no moisture can penetrate it.

You should begin by sanding the surface of the lure as smooth as possible. Then use a clean rag or brush to dip in the sealer and apply evenly across all surfaces. Allow each coat enough time to dry before adding the next layer, usually about 30 minutes per application.

“The key is not just sealing once but reapplying every season or few uses if needed. “

An additional tip for protecting your pine fishing lure from water damage is storing it in a cool place when not in use. Exposure to heat and sunlight could cause cracking and warping of your lure over long periods.

To sum up, proper sealing plays an essential role in maintaining any wooden lures; thus, following these simple steps will help increase their lifespan significantly while keeping them protected against unwanted humidity problems.

Preventing the wood from warping or cracking

Pine is a popular material for creating fishing lures due to its lightness and durability. However, if not properly sealed, pine can be prone to warping or cracking when exposed to water. Here are some tips on how to prevent this:

1) Use a high-quality sealer: Look for a sealant that is specifically designed for use on wood and can withstand exposure to water. Apply multiple coats, following the manufacturer’s instructions carefully.

2) Store in a cool, dry place: Avoid exposing your pine fishing lure to extreme temperatures or humidity levels. Ideally, store it in an area with consistent temperature and low moisture.

3) Handle with care: Pine can be fragile, so avoid dropping or mishandling the lure. If possible, remove any hooks before storing or transporting it.

“By taking these steps, you’ll help ensure that your pine fishing lure stays in good condition for longer. “

4) Check regularly: Keep an eye on your fishing lure over time to look out for any signs of warping or cracking. If you notice anything unusual, take action immediately by resealing as needed or making repairs.

In general, sealing a pine fishing lure should last long enough as long as you follow these preventive measures consistently and adequately handle it. Take care of your tool no matter what type of fish you’re targeting – this will pay off big time. ”

How long should you let the sealer dry?

If you’re a fisherman, then most likely you have heard that sealing your fishing lures is essential. It helps stop water from penetrating them and consequently extends their lifespan. One question that frequently crops up is how long to let the sealer dry before it’s safe to use the lure again.

The answer depends on various factors such as humidity levels, weather conditions, and the type of sealant used. Generally, it takes between 24-48 hours for most sealers to cure properly. However, some types can take longer depending on the thickness applied.

“If possible, always follow the manufacturer’s instructions. “

In general, though, when using pine fishing lures what we recommend doing is leaving them overnight in an area without high humidity levels after applying a thin coat of sealer. Once this time has passed, check carefully by touching them; if they feel hard but not tacky or sticky anymore to touch and aren’t giving off any scent at all! Then they’ll be safe to go back into action!

Overall though like with many things within life my friend – patience pays dividends. So while waiting might be inconvenient at times remember one thing: going too quickly could result in ruining something good! All this being said though following these simple steps will help keep your fishing experience great year round – happy angling everyone!

The recommended drying time for most sealers

When it comes to sealing a pine fishing lure, there are several factors that can affect the drying time of the sealer. The type of sealer used, humidity levels, and temperature all play a role in how long it takes for the sealer to dry.

Most sealers will take between 12-24 hours to fully dry on a pine fishing lure. However, this may vary depending on environmental conditions such as temperature and humidity. It is important to read the manufacturer’s instructions carefully before applying any sealer to ensure you get the best results possible.

“It is always better to wait longer than rush the process”

If you are unsure about how long it will take for your chosen sealer to dry, it is always better to err on the side of caution and give it more time rather than rushing things along. Rushing the drying process can lead to uneven results or even cause the sealer to not adhere properly.

In addition, it is important to note that different types of sealers may have different drying times. For example, a water-based sealer may take longer to dry compared to an oil-based one. It is also worth noting that some sealers require multiple coats which can extend the overall drying time. Overall, patience is key when it comes to sealing a pine fishing lure. Taking your time and allowing adequate drying time will result in a well-sealed finish that provides protection from moisture and wear ensuring your lure lasts longer out on the water.

Factors that may affect drying time

The drying time of a pine fishing lure can vary depending on several factors. These include:

Humidity levels: High humidity levels can slow down the drying process as moisture in the air makes it difficult for water-based sealant to evaporate completely.

Temperature: The temperature at which you are sealing the pine fishing lure can also impact drying time. Higher temperatures help speed up evaporation and dry faster, whereas cooler temperatures have the opposite effect and take longer to dry.

Type of sealer used: The type of sealer used determines how long it takes to dry. Oil-based sealers typically take longer to dry compared to their water-based counterparts since they penetrate deeper into the wood.

Thickness of coat applied: The thickness of the sealer applied is another factor that affects drying time. Thick coats take longer to dry as they contain more moisture than thin coats do, meaning more time is required for them to evaporate completely.

Note: It’s important not to rush the process by applying too much heat or increasing ventilation if your pine fishing lure isn’t fully sealed; this could lead to cracks forming during future use causing damage.

If all these factors are carefully considered when sealing a pine fishing lure, one should expect an average drying time of 4-6 hours before handling or using it again.

What types of sealers work best on pine fishing lures?

If you’re looking for the perfect sealer to use for your pine fishing lure, it’s important to know that not all kinds will work well. Pine is a fairly porous type of wood which means if left unsealed, water can easily penetrate and ruin it in no time at all.

Many experts who create wooden fishing lures suggest using an epoxy resin as it provides excellent protection against moisture while also making the lure more durable overall. This kind of sealer starts as a liquid but quickly hardens once mixed properly providing complete waterproof coverage.

A clear polyurethane coating is another option when sealing pine fishing lures. They offer a high gloss finish that looks good even after continuous usage and have UV blockers that prevent ultraviolet rays from discoloring or fading off the lure quickly.

It’s essential to note that whatever sealer you opt for should be applied correctly. Whether you are using brush-on varnish or spray-on lacquer; ensure there’s enough coverage by applying multiple coats with drying times before applying each subsequent coat to help strengthen, protect, and last long

The lifespan of your sealed pine Fishing Lure into several years depends solely on how accurate the application procedures are being carried out in terms of number of layers and frequency of reapplication & maintenance

Oil-based sealers

When it comes to sealing a pine fishing lure, choosing the right type of sealer is crucial. One popular option for anglers is oil-based sealers.

This type of sealer provides long-lasting protection against water and harsh elements that can damage your lure over time. It also enhances the color and wood grain of your lure, making it more attractive to fish.

Before applying an oil-based sealer, make sure you sand down any rough spots or imperfections on your lure’s surface. This will ensure that the sealer adheres properly and gives you better coverage overall.

If you’re using an oil-based sealer, be prepared to wait a bit longer before reapplying another coat. Oil-based products take longer to dry than their water-based counterparts, so you should typically wait at least 24 hours between coats.

To get the best results with an oil-based sealer, consider applying two to three thin coats rather than one thick coat. Thin coats are easier to apply evenly and will dry faster.

In general, how long you should seal a pine fishing lure for depends on several factors such as how often you use your lures, what kind of weather conditions they’ll be exposed to, and what type of fishing you plan on doing.

A good rule of thumb is to inspect your lures regularly and reseal them whenever they start showing signs of wear and tear. For most anglers, this means sealing their lures every six months to a year.

Water-based sealers

If you’re looking for a sealer for your pine fishing lure, you might consider using a water-based sealer. These types of sealers have grown in popularity due to their ease of use and environmental friendliness.

Applying a water-based sealer to your pine fishing lure can help prolong its life by protecting it from harsh weather conditions and the wear and tear that comes with frequent use. It’s important to note how long you should keep applying this type of sealer so as not to overdo or underdo it.

The recommended amount of time between coats of water-based sealant is around 24 hours. This will allow enough time for the current coat to dry completely before another layer is added on top.

Generally speaking, one or two layers of water-based sealer are sufficient when sealing a pine fishing lure. However, some users choose to apply additional coats if they want extra protection against scratches or other damage.

To ensure maximum effectiveness from your water-based sealer, always make sure the area being sealed is clean and free of any debris or old coatings before starting. After each coating period, inspect the lure carefully to check whether all areas are properly coated.

In conclusion, be cautious about how much and often you apply such sealants onto your lures since too little may result in ineffective shielding while excessive application could lead to cracking or even smudging in extreme cases!

Other types of sealers to consider

If you’re looking for alternative sealers to use on your pine fishing lure, there are a few options available:

Epoxy: Epoxy is a popular type of sealer among anglers and can provide a durable finish. It typically requires two parts: resin and hardener.

Polyurethane varnish: This sealer is commonly used for high-gloss finishes and is relatively simple to apply. However, it may not be as strong as epoxy or other sealers.

Spar urethane: Spar urethane is a specialized type of polyurethane that’s designed specifically for outdoor use. It’s formulated with UV inhibitors to resist fading from sunlight exposure and provides excellent protection against water damage.

“Using the appropriate sealer on your pine fishing lure will help prolong its lifespan and ensure it withstands harsh conditions. “

No matter which type of sealer you choose, it’s crucial to follow the manufacturer’s instructions carefully. Each product has its specific application process, drying time, and reapplication guidelines–it’s essential to adhere to them correctly.

In conclusion, taking the time to properly seal your pine fishing lure helps protect it from wear-and-tear caused by natural abrasion factors such as fish teeth, rocks, sandbars along with making sure they don’t split in half due long-term water exposures. So always take great care when choosing which kind of sealer works best for your needs!

How Long Should You Seal A Pine Fishing Lure For?

Pine fishing lures are a popular choice for anglers due to their strong, lightweight and buoyant properties. However, being made of wood means that pine lures require sealing in order to protect them from water damage.

The number of coats of sealer required depends on the type of sealant used. Generally, it is recommended to apply at least two coats of sealer when protecting a pine fishing lure. The first coat should be thinly applied so that the wood can absorb it fully. The second coat should be slightly thicker, creating a more protective barrier.

You should wait for your coat of sealer to dry completely between each application. This usually takes around 24 hours depending on the humidity levels where you live.

To ensure maximum protection against water damage for your pine fishing lure, it is essential to let the final coat cure properly before use. Waiting 72-96 hours after applying the last layer will allow time for any remaining solvent to evaporate and leave behind a durable finish.

It’s also recommended that you store your sealed pine fishing lure out of direct sunlight as this can cause fading or cracking over time. Properly caring for your wooden lures with regular cleaning and resealing will extend their lifespan and keep them looking great for years to come.

Factors that may influence the number of coats

The type of pine wood used in making a fishing lure can play a big role in determining how long you should seal it for. Depending on the quality and condition of the wood, some lures may require more or fewer coats to achieve adequate protection.

The intended use of the lure will also affect how many coats are necessary. If you plan to fish in rough waters or extreme weather conditions, a thicker coat with multiple layers may be needed to provide sufficient protection against the elements.

The type of sealer being used is another factor to consider when deciding on the number of coats required. Some types of sealers such as varnish offer better protection than others and may only require one or two coats to get optimal results.

It is always important to follow manufacturer instructions carefully when applying any type of sealer. This ensures that enough time lapses between each coating and that they are applied correctly so that your fishing lures last longer without needing frequent reapplication.

Lastly, humidity levels in your workspace can also influence the number of coats required before drying up completely. It’s best practice to wait until one layer has fully dried up before applying another coat regardless if there’s high moisture level in air

By considering these factors, you’ll determine what works best for sealing your pine fishing lure and creating an effective barrier against water damage over several seasons.

The recommended number of coats for a pine fishing lure

Sealing a pine fishing lure is an important step in ensuring its longevity and effectiveness. However, it can be difficult to determine how many coats of sealant are necessary for optimal protection.

A common recommendation among experienced anglers is to apply at least three coats of sealant to your pine lure. The first coat should be applied as soon as possible after carving the lure, with subsequent coats added once the previous layer has dried completely.

The type of sealant you choose will also impact the number of coats needed. Some types may require more or fewer layers depending on their thickness and level of protection. For example, some water-based sealants may need four or more coats for adequate coverage, while others may only require two or three.

It’s important to note that even if you think you’ve applied enough coat, adding one extra layer isn’t going to hurt anything but might provide an additional protective barrier against wear-and-tear from water exposure in harsh marine environments.

In general, it’s better to err on the side of caution and add too many coats rather than too few. This will ensure that your pine fishing lure remains protected against water damage and retains its color and texture over time.

Overall, anglers should keep these recommendations in mind when sealing their wooden lures: apply at least three layers, use high-quality materials such as epoxy resin or polyurethane coatings, inspect regularly with care after each trip out into saltwater (mud bottom rock ledges), let dry fully between applications so there is no moisture trapped inside wood fibers which can cause swelling, cracking upon drying etcetera—it pays attention not only during application itself but throughout entire process keeping track every little detail making sure everything goes smoothly from start till end result; lastly consider doing a test run along with some experimentation to gain experience and knowledge in this field’s ins and outs.

What tools do you need to seal a pine fishing lure?

If you want to seal your pine fishing lure before using it, there are a few essential tools and materials that you will need:

Sandpaper: Sanding the surface of the pine wood is important in order to get an even finish. Use coarse-grit sandpaper (80-100) for this purpose.

Sealant: Choose an appropriate sealer that works well on softwood surfaces such as pine. Polyurethane sealants work best for wooden lures.

Paintbrush or spray gun: Depending on your preference, use either a paintbrush or spray gun to apply the sealant evenly across the surface of the lure. Make sure you cover all areas thoroughly, including hard-to-reach corners and crevices.

Clean cloth: After sealing the wooden lure with polyurethane sealer, clean up any excess residue using a dry, clean cloth.

To ensure maximum protection against water damage, it is recommended that you coat your pine fishing lure at least twice with polyurethane sealer. Also make sure each layer dries completely before applying another coat.

In conclusion, these simple tools can help extend the life of your handmade pine fishing lures while also adding an attractive finish. Remember, always follow safe handling precautions when working with sealants and other chemicals — especially if spraying them on outside during windy weather conditions!


Sandpaper is an abrasive material that is commonly used to smooth surfaces. It consists of a paper or fabric backing, which is coated with tiny particles of abrasive grit such as aluminum oxide or silicon carbide.

The type and grade of sandpaper you should use depends on the task at hand. For instance, if you are sanding wood before staining it, you may want to start with 80-grit sandpaper to remove any rough patches and then work your way up to finer grades like 120- or 150-grit.

When using sandpaper, it’s important not to press too hard as this can damage the surface you’re working on. Instead, use light, even pressure and move the sandpaper in circular motions for best results.

“It’s recommended that you seal your pine fishing lure by dipping it into a coat made from epoxy resin for about two to three times. “

If using sandpaper becomes too time-consuming or difficult, there are other options available such as electric sanders or chemical paint strippers. However, these methods always come with their own set of risks and challenges.

In summary, when it comes to achieving a smooth finish on your woodworking project or other tasks requiring sanding, selecting the right type and grade of sandpaper and applying proper technique will make all the difference in obtaining desirable results.


A paintbrush is a powerful tool used for painting and decorating. It is made up of bristles arranged in a ferrule, which can be attached to a handle. The type of brush you choose depends on the surface you are painting and the effect you want to achieve.

When choosing a paintbrush, it is important to consider the size of the brush relative to the area being painted. A large brush might not work well when working with intricate details, while small brushes may take longer time when covering larger surfaces. Also, synthetic and natural fibers have different properties that make them suitable for certain applications.

Caring for your paintbrush will also determine its lifespan and effectiveness over time. Always keep them clean after each use by washing with warm water or solvents as required. Store them carefully too; they should never come into contact with other types of sprays or chemicals that could damage their delicate bristles.

The quality of your equipment determines the overall quality of your finished product: invest in high-quality paintbrushes if you want standout and captivating results.

In conclusion, whether you’re just starting out in DIY projects or an expert decorative artist, understanding how to properly care for your paintbrush would significantly turn around your proficiency at production level influence looks like much more than a mere acquisition cost savings.


Pine fishing lures are a great addition to any angler’s tackle box. They are popular because of their buoyancy, durability, and flexibility. However, pine is a porous wood that can easily absorb water. To prevent your pine fishing lure from becoming waterlogged or sinking like a rock, it is important to apply a sealer.

The question on every angler’s mind when using sealers is “how long should you seal a pine fishing lure for?” The answer depends on the type of sealer being used. Some sealers need to be applied in multiple layers with drying time between each layer. Others can be applied all at once and dry within minutes.

A rule of thumb when sealing pine fishing lures is to apply two coats of sealer with 24 hours drying time in between each coat. This will ensure that the sealer has properly absorbed into the wood and sealed off any pores or gaps that would allow water penetration.

Note: Be sure to read the manufacturer’s instructions before applying any sealer to your pine fishing lure as drying times may vary depending on environmental conditions such as humidity and temperature.

Once the sealer has dried completely, your pine fishing lure will have an added layer of protection against absorbing excess water which can lead to warping or cracking over time. By taking the necessary steps to protect your wooden lures, they will last longer for more days out on the water!

Are there any tips or tricks for sealing pine fishing lures?

If you have ever made your own wooden fishing lure, then you know how important it is to seal the wood to protect it from water damage and decay. Pine lures are popular among novice lure makers because they are readily available and easy to work with, but sealing them correctly can be tricky.

The first tip is to use a sealer that is specifically designed for outdoor use and meant for wooden surfaces. This will ensure adequate protection against moisture. It’s also important to choose a clear sealer so that the natural color of the pine shows through.

When applying the sealer, make sure you do several coats rather than just one thick coat. This allows each layer to dry completely before adding another layer, which helps provide better coverage. After applying multiple layers, let the final coat dry overnight as further insurance against water penetration.

It’s crucial not only to cover every area evenly but also all parts of the surface including edges and nooks in order to avoid any vulnerability

Once properly sealed, your pine fishing lure should last for years if taken care of properly. When storing or cleaning your lures after using them always remove hooks and swivels with care avoiding causing harm on yourself by avoiding sharp edges. Though bait maintenance could make some anglers feel uneasy once gotten used-to will bring a different effect almost an addictive one!

Sand the lure before applying the sealer

When it comes to sealing a pine fishing lure, sanding is an essential step in the process. Before you apply any sealant or paint, you should ensure that your lure has been properly sanded down.

This will help to remove any rough edges or imperfections on the surface of the wood, which could impact how well the sealer adheres to the lure. It also helps to create a smooth and even surface for painting or staining later on if desired.

The type of sealer you use may impact how long you need to wait for it to dry completely before using the lure again. Some sealants can take several hours while others may take up to 24-48 hours to fully dry depending on various factors such as humidity, temperature and application method.

It’s important not to rush through this process or cut corners when it comes time to sanding – doing so could compromise your results and lead to issues with your fishing gear down the road.– Fishing Pro Magazine

To ensure that your pine fishing lures remain in top condition throughout their use, both seasoned anglers and novices alike are encouraged always follow all recommendations regarding drying times and proper maintenance techniques. If you’re unsure about what kind of sealer would be best suited for your specific needs, speak with a knowledgeable sales associate at local bait shops or outdoor supply stores near you.

Apply thin coats of sealer

When it comes to sealing a pine fishing lure, applying thin coats of sealer is the recommended approach. How long you should seal a pine fishing lure for depends on several factors, such as the type of sealer used and the environment in which the lure will be used.

The first step in sealing a pine fishing lure is to sand down any rough spots or imperfections. This ensures that the surface is smooth and ready for sealing. Next, apply a thin coat of sealer to the entire lure using either a brush or spray can.

After allowing sufficient time for the first coat to dry (usually 1-2 hours), lightly sand the surface with fine-grain sandpaper before applying additional coats. The number of coats required will depend on the type of sealer used; however, two to three coats are typically enough.

The key when working with sealers is patience. Rushing through this process may result in an uneven finish that detracts from your lures’ overall aesthetics.

Once all coatings have been applied and allowed ample drying time depending on manufacturer requirements, assess if there is still some tackiness left over from previous layers before adding more or piling them up again too quickly/closely together without adequate spacing between each pass so that air circulation within those areas does not stop entirely – always let one layer cure fully before building upon them by another application!

In conclusion, properly sealing your pine fishing lures requires careful attention detail and patience, primarily because how well-treated these lures hold their flavor greatly affects fish’s ability to bite! Always ensure you follow manufacturer recommendation guidelines correctly, far exceeding rather than missing critical preparation steps along the way guarantee success towards having fantastic results every time at water bodies big or small!

Use a high-quality paintbrush for best results

If you want to achieve the best results when painting your pine fishing lure, it is important that you invest in a high-quality paintbrush. A low-quality brush may cause streaking or uneven application of paint which can ultimately ruin your finished product.

You should be able to find good quality brushes at your local craft store or online retailer. Look for brushes made from natural bristles, as these are typically more durable and produce better results than synthetic alternatives.

Tip: Before using any new brush, make sure to clean it thoroughly with soap and water. This will help remove any remaining residue or oils that could affect the performance of the brush.

Avoid using cheap foam brushes or those with plastic bristles as they tend to deform easily during use. Additionally, avoid buying larger sized brushes thinking that it will save time – instead select one that works perfectly for painting a small surface area like a lure.

When applying paints always work on thin coats (attempt 2-4 layers), waiting about 15 minutes between applications so that each layer dries completely before moving on to the next coat. Once everything has been painted, seal your pine fishing lure by spreading enough clear lacquer around them properly. Regardless of how great the design of the lure is or how well you have crafted it internally; neglect sealing it would invariably call up an early death sentence on their durability!

Frequently Asked Questions

What type of sealant should you use for a pine fishing lure?

For a pine fishing lure, it is recommended to use a waterproof sealant that is safe for fish. Epoxy and polyurethane are commonly used sealants for wooden lures. These sealants can protect the lure from water damage and extend its lifespan.

How many coats of sealant should you apply to a pine fishing lure?

It is recommended to apply at least two coats of sealant to a pine fishing lure. This will ensure that the entire lure is covered and protected from water damage. However, you can apply more coats if you want to increase the durability and longevity of the lure.

How long should you wait in between coats of sealant for a pine fishing lure?

You should wait at least 24 hours in between coats of sealant for a pine fishing lure. This will allow the previous coat to fully cure and adhere to the wood. Applying the next coat too soon can cause the sealant to not properly bond, leading to water damage and a shorter lifespan for the lure.

Is it necessary to sand the pine fishing lure before applying the sealant?

Yes, it is necessary to sand the pine fishing lure before applying the sealant. Sanding will remove any rough or uneven surfaces on the lure, allowing the sealant to properly adhere to the wood. It will also help to create a smoother finish for the final product.

What is the expected lifespan of a pine fishing lure after being sealed?

The expected lifespan of a pine fishing lure after being sealed can vary depending on a number of factors, such as the quality of the sealant used and how often the lure is used. However, with proper care and maintenance, a sealed pine fishing lure can last for several fishing seasons.

Do NOT follow this link or you will be banned from the site!